When E6 Connect runs, Tittle Device will automatically connect to E6 CONNECT. The blinking red LED lights of device turns white and you can hear the voice “Device connected”. If Tittle device is not connected, see next Connection Trouble Shooting.
Connection Trouble shooting
If you have trouble Tittle device connecting, check each one below.
1. Check E6 Track System is Tittle (if not ,change setting and run again)
2. Check Bluetooth is turned on in your PC.
3. Check Tittle device has enough batteries
4. Remove the Tittle device paired from the PC Bluetooth settings
5. Reset Tittle device by plugging into a USB cable.
Please refer to the User Manual for details.